华南大陆东部赣闽地区地壳厚度与泊松比研究     

赵延娜  段永红  魏运浩  邹长桥  林吉焱  邱勇 《大地测量与地球动力学》2017,37(3):261-266

通过收集江西省和福建省共58个固定台站记录到的2011-01～2012-12的远震数据,利用接收函数H-κ扫描叠加方法得到台站下方平均地壳厚度和波速比估计,并通过插值得到华南大陆东部赣闽地区整体的地壳厚度变化趋势以及泊松比分布情况。结果表明,研究区地壳厚度约为28～34 km,由内陆向沿海有起伏地逐渐减薄,赣南地区同福建沿海地区地壳厚度较薄,江西东部和福建西北部地壳较厚;泊松比约为0.21～0.28,由内陆向沿海逐渐增加,赣北地区泊松比值最低,低于0.23（波速比低于1.70）,沿海地区泊松比较高,可达0.28（波速比为1.83）。并探讨了造成地壳厚度和泊松比变化的构造因素。  相似文献   

隐蔽油气藏研究的难点和前沿   总被引：34，自引：0，他引：34  

郝芳  邹华耀方勇 《地学前缘》2005,12(4):481-488

隐蔽油气藏已成为中国油气勘探的主要领域之一。随着勘探程度的提高,隐蔽油气藏勘探向复杂条件拓展,深层隐蔽油气藏发育与保存、不整合面结构与隐蔽油气藏分布、调整改造型隐蔽油气藏形成和保存机理成为隐蔽油气藏勘探和成藏机理研究的难点和前沿。深部存在活跃源岩和具有较高孔隙度和渗透率的储层是深层隐蔽油气藏成藏的基础。超压环境生烃作用动力学的研究进展提高了预测深层源岩生烃潜力的能力,已知的深层高孔隙度储层保存机理可成为预测深部储层孔渗条件的基础。不整合面结构特别是古土壤层的厚度及封闭能力、古土壤层之下半风化岩层的厚度及渗透率是研究与不整合面有关的隐蔽油气藏的关键。由于多期构造叠加、多期生烃和多期成藏,叠合盆地很多隐蔽油气藏经历了不同程度的调整改造,形成有成因联系的一系列调整改造型隐蔽油气藏,研究晚期构造与早期构造的叠加方式是预测调整改造型隐蔽油气藏的基础。准噶尔盆地中部,隐蔽油气藏同时具有埋藏深、不整合面结构复杂、多期成藏多期调整改造的特点,是建立复杂隐蔽油气藏成藏与勘探理论的天然实验室。  相似文献   

A seismic investigation into the geometry and controls upon alluvial architecture in the Walloon Subgroup,Surat Basin,Queensland     

D. Shields  V. Bianchi  J. Esterle 《Australian Journal of Earth Sciences》2017,64(4):455-469

The sedimentology of the Walloon Subgroup (WSG) has been extensively studied; however, gaps exist in our understanding of the succession's alluvial architecture and the mechanisms controlling its complex internal organisation. Successful coal-seam gas development in the Surat Basin requires the construction of predictive facies models, which in turn necessitates a fulsome understanding of the geometry and controls on the spatial and temporal distribution of alluvial sub-environments. To improve our models of WSG facies, this study employs an open-source high-resolution 3D seismic dataset available on the western limb of the Surat Basin. Integration of core, wireline and seismic data has resolved the geometries of four discrete alluvial architectural elements, representing simple channel, channel belt, crevasse splay complexes and peat-mire sub-environments. Channel belts were found to be 1600–2000 m wide, simple channels 400–800 m in width and crevasse splays averaging 3.5 × 5.5 km. Coal bodies mapped from seismic attribute extractions were found to be 4.2 km² on average. The high-resolution dataset has also yielded insight into the geological controls governing the spatial and temporal distribution of these sub-environments, explaining, in part the mechanisms responsible for the complex internal distribution of facies within the WSG. In places within the study area, the WSG's sedimentary organisation appears to be initiated by the rejuvenation of deep-seated tectonic features, the expression of which is propagated upward via the mechanics of compensational stacking.  相似文献   

Architecture of vertically stacked fluvial deposits,Atane Formation,Cretaceous, Nuussuaq,central West Greenland     

MARIA A. JENSEN  GUNVER KRARUP PEDERSEN 《Sedimentology》2010,57(5):1280-1314

Excellent exposures of thick, multistorey, fluvial deposits from the deltaic Atane Formation on south‐east Nuussuaq, central West Greenland, show the architecture of up to 100 m thick continuously aggrading fluvial depositional complexes. The succession comprises vertically stacked channel belt sandstones separated by thin floodplain deposits, with little to no incision between storeys. Architectural elements and palaeocurrent patterns of channel deposits indicate deposition in large, relatively stable, low‐sinuosity rivers, probably located within an incised valley. Gradual transitions from channel to floodplain deposits accompanied by a gradual change from floodplain to spillover sand suggest avulsion on the floodplain as a possible mechanism for the vertically alternating channel and floodplain deposits. Despite its relative proximity to contemporaneous sea‐level (ca 35 km upstream from the palaeo‐shoreline) the depositional complex is entirely non‐marine. The aggrading nature of the deposits suggests a continuously rising base level coupled with a high and steady sediment supply. Vertical alternations between floodplain and channel deposits may be forced by subtle interruptions in this balance or autocyclic mechanisms on the floodplain. This study provides an example of aggrading lowstand/non‐marine transgressive systems tract deposits.  相似文献   

RESEARCH NOTE Stacking three-component seismograms   总被引：1，自引：0，他引：1  

B. L. N. Kennett 《Geophysical Journal International》2000,141(1):263-269

  相似文献   

基于相干目标的干涉图叠加方法监测天津地区地面沉降   总被引：2，自引：0，他引：2  

范景辉  郭华东  郭小方  刘广  葛大庆  刘圣伟 《遥感学报》2008,12(1):111-118

利用ENVISAT ASAR数据,采用基于相干目标的干涉图叠加方法,对天津地区的地面沉降现象进行了DInSAR监测试验.差分干涉处理采用"两轨法",使用校正了高程异常的SRTM DEM数据消除高程相位.以相干系数为标准选取了相干目标,解缠过程中运用了Delaunay三角剖分和权重最小费用流算法.本文获得的季度平均沉降速率图有效揭示了试验区地面沉降的空间展布及相对形变量,但其获得的绝对形变量尚需地面实测数据校验.  相似文献   

Dimensions and architecture of late Pleistocene submarine lobes off the northern margin of East Corsica   总被引：2，自引：0，他引：2  

MARK E. DEPTUCK  DAVID J. W. PIPER  BRUNO SAVOYE  ANNE GERVAIS‡ 《Sedimentology》2008,55(4):869-898

Sandy lobe deposits on submarine fans are sensitive recorders of the types of sediment gravity flows supplied to a basin and are economically important as hydrocarbon reservoirs. This study investigates the causes of variability in 20 lobes in small late Pleistocene submarine fans off East Corsica. These lobes were imaged using ultra‐high resolution boomer seismic profiles (<1 m vertical resolution) and sediment type was ground truthed using piston cores published in previous studies. Repeated crossings of the same depositional bodies were used to measure spatial changes in their dimensions and architecture. Most lobes increase abruptly down‐slope to a peak thickness of 8 to 42 m, beyond which they show a progressive, typically more gradual, decrease in thickness until they thin to below seismic resolution or pass into draping facies of the basin plain. Lobe areas range from 3 to 70 km² and total lengths from 2 to 14 km, with the locus of maximum sediment accumulation from 3 to 28 km from the shelf‐break. Based on their location, dimensions, internal architecture and nature of the feeder channel, the lobes are divided into two end‐member types. The first are small depositional bodies located in proximal settings, clustered near the toe‐of‐slope and fed by slope gullies or erosive channels lacking or with poorly developed levées (referred to as ‘proximal isolated lobes’). The second are larger architecturally more complex depositional bodies deposited in more distal settings, outboard more stable and longer‐lived levéed fan valleys (referred to as ‘composite mid‐fan lobes’). Hybrid lobe types are also observed. At least three hierarchical levels of compensation stacking are recognized. Individual beds and bed‐sets stack to form lobe‐elements; lobe‐elements stack to form composite lobes; and composite lobes stack to form lobe complexes. Differences in the size, shape and architectural complexity of lobe deposits reflect several inter‐related factors including: (i) flow properties (volume, duration, grain‐size, concentration and velocity); (ii) the number and frequency of flows, and their degree of variation through time; (iii) gradient change and sea floor morphology at the mouth of the feeder conduit; (iv) lobe lifespan prior to avulsion or abandonment; and (v) feeder channel geometry and stability. In general, lobes outboard stable fan valleys that are connected to shelf‐incised canyons are wider, longer and thicker, accumulate in more basinal locations and are architecturally more complex.  相似文献   

Wave–current interaction with a vertical square cylinder     

Pengzhi Lin  C. W. Li   《Ocean Engineering》2003,30(7):855-876

A three-dimensional numerical model is developed in this study to investigate the problem of wave–current–body interaction. The model solves the spatially averaged Navier–Stokes equations. Turbulence effects are modeled by a subgrid-scale (SGS) model using the concept of large eddy simulation (LES). The model is employed to study the wave–current interaction with a square cylinder that is mounted on the bottom and vertically pierces the free surface. The force analysis demonstrates that the presence of waves can reduce both the strength and frequency of vortex shedding induced by a uniform current due to the nonlinear wave–current interaction. The free surface elevation, strain rates of the mean flow, and eddy viscosity are found to closely correlate with the mechanism of vortex shedding. It is also shown that when the vortex shedding is neglected in the calculation such as by the potential flow approach, one may significantly underestimate the magnitude of in-line force. The energy spectral analysis reveals that there exist initiating, growing, and decaying regions for shedding vortices around the cylinder. In the vortex initiating region, both coherent and turbulent structures are nearly two-dimensional that become three-dimensional in the vortex growing region. The kinetic energy of both coherent and turbulent motions is dissipated in the vortex decaying region, within which the mean flow gradually returns back to two-dimensional.  相似文献   

Use of openly available occurrence data to generate biodiversity maps within the South African EEZ     

D Yemane  SP Kirkman  T Samaai 《African Journal of Marine Science》2020,42(1):109-121

Biodiversity maps are an important component of ecosystem-based management and conservation. In the past, biodiversity maps were largely generated using patchy occurrence data from a range of data sources. Currently, substantial species occurrence data are readily available for large parts of the world and are accessible programmatically. Considering both the observed and expected changes in species distributions, and hence biodiversity, in response to present and future climate change, it is important to utilise readily available species occurrence databases to generate temporal and spatial biodiversity maps. In this study biodiversity maps were generated for three generic functional groups within the exclusive economic zone of South Africa: zooplankton, fishes and benthos. This was achieved by stacking individual species-distribution maps. Freely available occurrence data from the Ocean Biogeographic Information System (OBIS) were accessed for this purpose. Ensemble species-distribution modelling, employing five widely used statistical methods, was used to generate species-distribution maps for each functional group. The resulting spatial patterns of biodiversity for the three functional groups were largely in agreement with known patterns. The results of this study highlight the value of open-source occurrence and environmental data to generate biodiversity maps that can potentially be used in future spatial prioritisation or planning for management of marine areas and in environmental-change studies.  相似文献   

Simulation of airflow around rain gauges: Comparison of LES with RANS models     

George S. Constantinescu  Witold F. KrajewskiCelalettin E. Ozdemir  Talia Tokyay 《Advances in water resources》2007

Wind is responsible for systematic errors that affect rain gauge measurements. The authors investigate the use of computational fluid dynamics (CFD) to calculate airflow around rain gauges by applying a high-resolution large eddy simulation (LES) model to determine the flow fields around a measuring system of two rain gauges. The simulated air flow field is characterized by the presence of massive separation which induces the formation and shedding of highly unsteady eddies in the detached shear layers and wakes. Parts of these detached structures occur over the orifice of the rain gauges and may substantially affect the dynamics of the raindrops in this critical region. Non-dissipative LES methods used with fine enough meshes can successfully predict these eddies and their associated fluctuations. The authors compare statistics from LES with steady-state Reynolds averaged Navier–Stokes (RANS) simulations using the k–ε and shear stress transport k–ω turbulence models. They find that both RANS and LES models predict similar mean velocity distributions around the rain gauges. However, they determine the distribution of the resolved turbulent kinetic energy (TKE) to be strongly dependent on the RANS model used. Neither RANS model predictions of TKE are close to those of LES. The authors conclude that the failure of RANS to predict TKE is an important limitation, as TKE is needed to scale the local velocity fluctuations in stochastic models used to calculate the motion of raindrops in the flow field.  相似文献